Full Step-by-step Guide for Installing a New Shower Unit

Book With Us Today!

Presented here below you will discover a lot of wonderful information and facts around Simple ways to Install a Shower Cubicle on Your Own.


How to Install a Shower Enclosure
A successful shower installment needs careful planning and also a lot of job. For the most part, you will require to do three sorts of tasks: framing wall surfaces, setting up the plumbing, and ending up walls.

Prep work


Firstly, you need to decide on the kind of shower that you wish to mount. It is important to establish whether the picked shower is capable of handling particular systems as well as can control a risk-free level of water through the boiler. The majority of shower devices nowadays are developed to be flexible to different water pressures (such as stored warm water and chilly keys).
It is additionally essential to consider the water stress and also the preparation of the piping and water drainage for the shower

Various Kinds Of Shower Units


  • Push-on Mixer: The hose and also spray parts of the push-on mixer shower device can be connected to the bath tap based on your need, as well as the water temperature can be adjusted using the faucets. Push-on mixers are cheap and extremely simple to install. Nonetheless, although the pipe connection is basic, it is conveniently removed. Additionally, it is troublesome to adjust the temperature.

  • Bath/Shower Mixer: The tube and spray of this type of shower are integrated with a bathroom mixer tap, as well as the temperature level can be adjusted with the bathroom faucets. It is a really economical alternative as well as no added plumbing is involved. Nevertheless, the bath/shower mixers additionally suffer from troublesome temperature control options.

  • Handbook Mixer: The pipe as well as spray of a manual mixer shower system are a part of the wall unit as well as the cold and hot water materials are linked to a single valve The temperature level and also pressure of the water are managed through either one or a range of knobs (in much more expensive showers). Although temperature level control is much easier in hand-operated mixer kinds, they are much more expensive than the formerly pointed out mixers. They also require extra plumbing of hot and cold water pipelines.

  • Thermostatic Mixer: The hose and spray of this shower kind are a part of the wall surface unit as well as the hot and cold water products are connected to a solitary valve right here also. It is complete with an integrated stabiliser to self-adjust the water temperature level as well as to stop it from ending up being as well warm. One of the greatest benefits of a thermostatic mixer shower kind consists of hassle-free temperature control. However, it is the most costly of the various mixer alternatives.

  • Power Shower: A power shower is a single system consisting of an effective electric pump that is capable of altering both the water stress and temperature level. This sort of shower can be fitted if there is water system from a cold water cistern and a hot water cylinder. A power shower makes the adjustment of both pressure and temperature level simple. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is supplied by a combination central heating boiler under keys pressure.

  • Electric Shower: An electrical shower is plumbed right into a keys cold water supply as well as it heats the water electrically. It is important to keep in mind that for this shower kind to be mounted, the mains stress needs to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The system permits the temperature level and also stress to be adjusted through a knob. Models with temperature stabilisers are better as they stay unaffected by various other faucets somewhere else in use within the household. A major disadvantage of electric showers is that the control handle just permits the choice of high temperatures at much less pressure, or lower temperatures at a greater stress. This is bothersome in the winter season when the spray is often weak and also the mains water is colder. Nevertheless, this trouble is tackled in some versions which are offered with a winter/summer setting.

  • Method


    Depending on the sort of shower you wish to set up, the shower head should either be fitted in order to avoid its contact with the water in the bathroom below or the base tray, or it needs to have a check valve.
    Before beginning, it is a good idea to note the positions of the shower head and also control, and also to intend the pipe-work entailed. Furthermore, the water drainage system to remove the waste water will require to be intended. Both placements of the wire path as well as the shower switch will certainly likewise need to be considered if a rapid or electrical shower unit is being set up.
    Make use of the direction overview provided with the shower system to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is necessary to remove the water supply. In order to secure the pipelines, they must be offered a water resistant covering as well as likewise fitted with separating shutoffs. The pipes can then be buried into the wall and glued over to neaten the general look.
    Fit the base tray, shower head, and fittings.
    Attach the major shower control to the pipelines that will certainly be supplying the water (This might require a female screw thread adapter).
    Reconnect the supply of water and also examination the pipelines for any kind of leakages, as some might require firm.
    If you are mounting an electric shower, keep in mind to turn off the power supply prior to making any electric links. When these links have been made (there should be support within the instruction manual), the power supply can be switched over back on.

    Readjusting Water Pressure to Suit Your Shower


    The cold water storage tank can be lifted to a higher elevation (often just 150mm (6inches)) by fitting a strong wooden assistance beneath it - possibly made up of struts and blockboards. If you select this choice, the major and also distribution pipes will likewise need to be elevated to fulfill the brand-new height of the tank.
    Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is picked, it has to be linked right into the power supply in order to operate.

    Piping and Drainage


    It is best to use 15mm size supply pipelines, and also make the runs to the shower as short and also straight as feasible so regarding keep maximum pressure and also minimise heat loss. In addition, by reducing using elbow joints for pipe edges, you can decrease the resistance in the circulation of the water. You can accomplish this by flexing the pipes rather.

    A Lot Of Common Errors


  • Breaking or ignoring regional code constraints.

  • Utilizing pipelines that are also small.

  • Connecting copper to galvanized without making use of a brass or dielectric fitting in between the two.

  • Not utilizing tape or pipeline compound at threaded joints.

  • Uneven your fixtures when installing them.

  • Not mounting an air void filling for fixtures.

  • Cutting supply stub outs as well brief to set up the shutoff valves onto after the completed wall surface remains in area.

  • Not properly aligning tubing into installations or quit valves. (Forcing the nut onto the compression ring at an angle when the tubing goes to an angle will certainly create a leakage.).

  • When turning the water back on in your home, constantly run the outside hose shutoff or purge your toilets to bleed dust as well as air from the lines. This debris can cause troubles in your sink taps as well as other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.


    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.


    Are you confused?


    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.


    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.


    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.


    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.


    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.


    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a One-Piece Shower Unit

    I am just very curious about How to Install a Shower Enclosure and I hope you appreciated the article. Loved our content? Please share it. Let somebody else find it. Kudos for your time. Come back soon.


    Call Us Today

    Leave a Reply

    Your email address will not be published. Required fields are marked *